Product info

  • Intelligent Camera
  • VCC-V90S
Intelligent Camera

VCC-V90S
iVISION:security

Texas INSTRUMENTS Davinci

VCC-V90S

The first true smart camera featuring an on-board DSP powered by Texas Instruments’ DaVinci platform. The DSP provides unparalleled customization and flexibility.

VCC-V90S
Setup Manual
Application Manual
Control API Manual


CCD uses Ye・Cy・Mg・G mosaic color filter that enables high resolution and sensitivity.
V90S is built around Texas Instruments’ “DaVinci™” technology and enables the camera to be programmable internally.
Enables NTSC/PAL for monitor video output. Digital image can be output via Ethernet.
Supports both http and ftp protocol.
SXGA (1280×720 @30fps), HDV (1280×960 @22.5fps), VGA (640×480 @30fps), QVGA(320 x 480@30fps)
Wide Dynamic Range Process at VGA resolution.
Dynamic Range Compression process. Long exposure shutter feature provides brilliant image even in very low light environment. Also supports dynamic range compensation feature by Apical Limited.
Allows longer shutter speed to provide high quality image in low lighting environment.
IR Cut filter IN/OUT feature can switch modes with AGC values automatically.
DC Iris control.
Enables electronic zoom and focus lens connectivity.
RS-232C port .
C/CS Mount ready
Power can be supplied by both DC+12V
Audio input and line output
Integrated I/O switch connector


  VCC-V90S
  Image Format SXGA 1280(H)×960(V)22.5fps
VGA 640(H)×480(V) 30fps
  Video output standard 1280(H)×960(V)(MAX/Ethernet Output)
NTSC/PAL(Monitor output)
  Power Consumption 7.0W MAX,5.0W Typical(DC+12V)
  Power Supply DC+12V±10%
  Operational environment (Operation guaranteed temperature) 0℃~+40℃ Humidity 20 ~ 80%
(Operation temperature) -5℃~+45℃ Humidity 20 ~ 80%
  Storage environment -25℃~ +60℃ RH 20 ~ 80% No condensation
  Weight Appx. 490g(Camera part)
  Network connectivity 100Base-TX Ethernet(RJ-45)PoE対応
  Video output signal VBS 1V(p-p)75ΩBNC
  Sync Method Internal Sync manual
  Pickup Device Device Type 1/3 TYPE Interline Transfer Color CCD SONY ICX445AKA
Total Pixel no. 1348(H) × 976(V)
Effective pixel no. 1296(H) × 966(V)
Active pixel no. 1280(H) × 960(V)
Unit cell size 3.75μm(H) ×3.75μm(V)
Chip size 6.26mm(H) × 5.01mm(V)
  Image Pickup Method Single-board Ye,Cy,Mg,G Mosaic
  Lens mount C/CS mount (refer to overall dimension drawing)
  Resolution Monitor: 330 TV Lines or more (VGA)
Ethernet: 660 TV Lines or more (SXGA,HDV)
  Minimum Illumination 0.5Lux (VGA, Gain30dB, y=0.45, IRCUT IN)
0.05Lux (XGA, Gain30dB, y=0.45, IRCUT OUT)
  Sensitivity 2000 Lux (Shutter 1/30s, Gain 0dB)
VGA F8 or more
HDV F5.6 or more
  Audio input Microphone input (Plug in power method 2.5V)
Monaural input (3.5 Monaural mini-jack)
Camera uses a stereo mini-jack, however, the other side must use a monaural mini-plug
  Audio output Line output
Monaural output (3.5Φ Monaural mini-jack)
Camera uses a stereo mini-jack, however, the other side must use a monaural mini-plug
    I/0 1 I/O Switch control
Output: Open collector (PULL UP 10KΩ +5V)
Input: Connector set to OPEN identifies ”1”,les than 1KΩGND, PULL DOWN:”0” (PULL UP 10KΩ+5V)