Product info
  • GC10
  • GC10
  • GC10
  • GC10
  • GC10
  • F40
  • GC10
  • GC10
  • GC10

VCC-GC10V31L

BW Partial scan

 


Only 22mm cubic in size (excluding projection), ultra light weight 19g, and low power consumption makes it a best match for use in enbedded systems which used to have remote-head cameras. With 14pins thin cable, total system cost can be reduced.
VCC-GC10V31L is an industrial B/W digital video camera module utilizing a 1/3, global shutter type, CMOS. At full frame scan mode, entire pixels can be read out within approx. 1/60s.
Interface of VCC-GC10 series comply with a camera link standard, the one to be determined as PoCL-Lite.

VCC-GC10V31L

Only 22mm cubic in size, 19g Global Shutter CMOS
Low Power Consumption External Trigger
NF Lens Mount Partial Scan


  VCC-GC10V31L
  Resolution VGA
  Sensor Type 1/3 TYPE CMOS (Global Shutter)
  Power Consumption 0.65W
  Input Voltage DC+12V±10%
  Operating Conditions Temperature　0℃～+40℃　　Humidity　20～80％
  Weight Approx 19g
  Lens Mount F Mount
  Frame Rate 60 fps
  Video Output Signal Digital 10 bit
  Effective Number of Pixels 752(H)×480(V)
  Horizontal Scan Frequency 31.4685kHz
  Pixel Clock 24.5454 MHz
  Pixel Size 6.0×6.0 (μm)
  Minimum Illumination F1.4  1 lx
  Sensitivity F5.6  400lx
  Gain Switching  0dB～+12dB
  Electronic Shutter Fixed: 1/60(OFF), 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000, 1/30000sec
Manual: 1/60(OFF) ～ 1/30000sec
Pulse Width: 1/2000 ～ 1/40000 sec
  Sync Method Internal Sync. 
  Trigger Mode Fixed Trigger Shutter Mode, Pulse Width Trigger Shutter Mode
  Partial Scan Full Frame Scan Mode,
1/2 Partial Scan Mode, 1/4 Partial Scan Mode, and 1/6 Partial Scan Mode
  Gamma Compensation 1 (Fixed)
  Control Interface PoCL-Lite
  Dimensions 22mmx 22mmx 22mm (excluding projection)