Product info





DCC-1055AN

 


UPC-100GE is a scan converter, which converts camera link input into Analog RGB signal output, connecting CIS PoCL cameras, VCC-F22/G22APCL series and VCC-F32/G32PCL series as camera heads. With connecting output signals to a PC monitor, camera video output images can be viewed easilly. Also, the still images captured by freeze function or live images of camera input signals can be output as Gig-E interfaced output.
 UPC-100GE
UXGA, SXGA, and VGA cameras can be selected as camera heads.
Camera basic control such as Gain, Shutter, and White Balance, can be controlled without PC.
Camera digital video output signals are converted to Analog RGB signals to view the images on regular PC monitor.
Auto White Balance adjustment function.
Gamma characteristics ON/OFF selection with front panel switch.
Horizontal and Vertical aperture control can be added to Analog RGB output signals.
Image freeze function.
Still images captured by freeze function or live images of camera input signals can be output as Gig-E interfaced output.
Two pairs of carsor indication.
Judgement function if a camera is connected or not, and if the synchronized signal value meets the actually connected camera's spec.
Built-in test pattern signal generating circuit corresponds to the connected camera.


  UPC-100GE
  Power Consumption 6W
  Power Requirements DC+12V±10%
  Oparating  Conditions (Performance guaranteed) 0℃~+40℃ with RH 20~80%
  Mass Approx. 550g
  Sync System
Internal Sync.
  Video Output Analog RGB output 15pins D-Sub
Gig-E RJ-45 (Pixel Format: 24 bit RGB)
 External Connector
 Interface
6 polar terminal
Trigger pulse input: TTL level
Freeze pulse input; TTL level
  Dimension 40mm×180mm×111.6mm