Product info



CL-OPT100

 


CL-OPT100T and CL-OPT100R are signal converters enable CIS camera link cameras to connect with frame grabber boards via optical fiber cables. With optical fiber cables, data can be transmitted up to 300m length. Owing to optical fiber cable connection, no radio interference or grand noise would occur. CIS cameras only specified can be connected.

 CL-OPT100T/R
CL-OPT100T convers camera link signals into optical signals.
CL-OPT100R convers optical signals into camera link signals.
Transmits data up to 300m length.


  CL-OPT100T CL-OPT100R
   Camera Link Input/Output Format Input: Camera Link Base or
PoCL-Lite		 Output: Camera Link Base
   Camera Link Input/Output CLK frequency Input: camera link driver/receiver
IC rated: 20MHz ～80MHz		 Output: 81 MHz fixed
   Trigger Delay Under 600ns Ref.Value: 1μs with 100m cable, 2μs with 300m cable.
  Optical Connector LC duplex Connector optical module rated: 4.25 Gb/s
Optical wave length: 850 nm
  Video Delay Under 1 line (Refer to the camera Specifications to be connected.)
Power Consumption 3.0 W
  Power Requirements DC+12V±10%
  Oparating  Conditions (Performance guaranteed) 0℃～+40℃　with RH　20～80%
  Mass Approx. 110g
  Correspondence
　Camera		 G22ACL/F22ACL Series, F32CL/G32CL Series
F51/F52 Series, G60FV11, GC10 Series
  Video Delay Under 1 Line (Refer to the camera Specifications to be connected.)
  Dimension 40mm x 20mm x 60mm